Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 93 / 326

EKI-9500 Series User Manual 74
The following table describes the items in the previous figure.
To add a new SNTP server:
Click System > Advanced Configuration > SNTP > Server Configuration > Add .
Figure 4.65 System > Advanced Configuration > SNTP > Server Configuration >
Add
The following table describes the items in the previous figure.
Server Status
Item Description
SNTP Server The address or host name of an SNTP server the device can use to
synchronize the system time.
Type The configured SNTP server address type, which can be IPv4, IPv6,
or DNS.
Port The UDP port on the server to which SNTP requests are sent.
Priority The order in which to query the servers. The SNTP client on the
device continues sending SNTP requests to different servers until a
successful response is received or all servers are exhausted. A server
entry with a lower priority value is queried before one with a higher pri-
ority. If more than one server has the same priority, the SNTP client
contacts the servers in the order that they appear in the table.
Version Specifies the NTP version running on the server.
Refresh Click Refresh to update the screen.
Add Click Add to add a new SNTP server.
Edit Click Edit to edit the selected entries.
Remove Click Remove to remove the selected entries.
Item Description
Host Name or IP
Address Specify the IPv4 address, IPv6 address, or DNS-resolvable host
name of the SNTP server. Unicast SNTP requests will be sent to this
address. The address you enter is displayed in the SNTP Server field
on the main page. The address type is automatically detected.
Port The UDP port on the server to which SNTP requests are sent.
Priority The order in which to query the servers. The SNTP client on the
device continues sending SNTP requests to different servers until a
successful response is received or all servers are exhausted. A server
entry with a lower priority value is queried before one with a higher pri-
ority. If more than one server has the same priority, the SNTP client
contacts the servers in the order that they appear in the table.
Version Specifies the NTP version running on the server.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.