Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 53 / 326

EKI-9500 Series User Manual 34
The following table describes the items in the previous figure.
To add a new DHCP server pool:
Click System > Advanced Configuration > DHCP Server > Pool Summary > Add .
Figure 4.14 System > Advanced Configuration > DHCP Server > Pool Summary
> Add
The following table describes the items in the previous figure.
Item Description
Name The name that identifies the DHCP server pool.
Type The type of binding for the pool. The options are:

Manual: The DHCP server assigns a specific IP address to the
client based on the client's MAC address. This type is also
known as Static.

Dynamic: The DHCP server can assign the client any available
IP address within the pool. This type is also known as Auto-
matic.

Undefined: The pool has been created by using the CLI, but the
pool information has not been configured.
Network For a Manual pool, indicates the host IP address to assign the client.
For a Dynamic pool, indicates the network base address.
Lease Time The amount of time the information the DHCP server allocates is
valid.
Refresh Click Refresh to update the screen.
Add Click Add to add a new DHCP server pool.
Remove Click Remove to remove the selected entries.
Item Description
Name The name that identifies the DHCP server pool.
Type of Binding The type of binding for the pool. The options are:

Manual

Dynamic
The binding type you select determines the fields that are available to
configure.