Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 47 / 326

EKI-9500 Series User Manual 28
To add a new authentication list:
Click System > AAA > Authentication List > Add .
Figure 4.5 System > AAA > Authentication List > Add
The following table describes the items in the previous figure.
4.3.1.2 Authentication Selection
Use the Authentication List Selection page to associate an authentication list with
each CLI-based access method (Console, Telnet, and SSH). Each access method
has the following two authentication lists associated with it:

Login: The authentication list to use for User EXEC-level management access
to the CLI. Access at this level has a limited number of CLI commands available
to view or configure the system. The options available in this menu include the
default Login authentication lists as well as any user-configured Login lists.

Enable: The authentication list to use for Privileged EXEC-level management
access to the CLI. In Privileged EXEC mode, read-write users have access to all
CLI commands. The options available in this menu include the default Enable
authentication lists as well as any user-configured Enable lists.
To access this page, click System > AAA > Authentication Selection .
Figure 4.6 System > AAA > Authentication Selection
Item Description
Authentication Methods
Available Methods The authentication methods that can be used for the authentication
list. Not all authentication methods are available for all lists. To set the
authentication method, select the method in the Available Methods
field and click the right arrow to move it into the Selected Methods
field.
Selected Methods The authentication methods currently configured for the list. When
multiple methods are in this field, the order in which the methods are
listed is the order in which the methods will be used to authenticate a
user. If the user fails to be authenticated using the first method, the
device attempts to verify the user's credentials by using the next
method in the list. No authentication methods can be added after
None. To remove a method from this field, select it and click the left
arrow to return it to the Available Methods area.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.