Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 314 / 326

295 EKI-9500 Series User Manual
To add a new DiffServ class:
Click QoS > Diffserv > Class Summary > Add .
Figure 4.322 QoS > Diffserv > Class Summary > Add
The following table describes the items in the previous figure.
4.7.3.3 Class Configuration
Use the Diffserv Class Configuration page to define the criteria to associate with a
DiffServ class. As packets are received or transmitted, these DiffServ classes are
used to classify and prioritize packets. Each class can contain multiple match criteria.
To access this page, click QoS > Diffserv > Class Configuration .
Figure 4.323 QoS > Diffserv > Class Configuration
The following table describes the items in the previous figure.
Item Description
Class Enter the name of the DiffServ class.
Type The class type, which is one of the following:

All: All the various match criteria defined for the class should be
satisfied for a packet match. All signifies the logical AND of all the
match criteria.
Protocol The Layer 3 protocol to use for filtering class types, which is either
IPv4 or IPv6.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.
Item Description
Class The name of the class. To configure match criteria for a class, select its
name from the menu.
Type The class type, which is one of the following:

All: All the various match criteria defined for the class should be
satisfied for a packet match. All signifies the logical AND of all the
match criteria.
L3 Protocol The Layer 3 protocol to use for filtering class types, which is either
IPv4 or IPv6.