Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 121 / 326

EKI-9500 Series User Manual 102
4.3.7.4 Hosts
Use the Logging Hosts page to configure remote logging hosts where the switch can
send logs.
To access this page, click System > Logs > Hosts .
Figure 4.101 System > Logs > Hosts
The following table describes the items in the previous figure.
To add a new host:
Severity The severity level associated with the log entry. The severity can be
one of the following:

Emergency (0): The device is unusable.

Alert (1): Action must be taken immediately.

Critical (2): The device is experiencing primary system failures.

Error (3): The device is experiencing non-urgent failures.

Warning (4): The device is experiencing conditions that could
lead to system errors if no action is taken.

Notice (5): The device is experiencing normal but significant
conditions.

Info (6): The device is providing non-critical information.

Debug (7): The device is providing debug-level information.
Component The component that has issued the log entry.
Description The text description for the log entry.
Refresh Click Refresh to update the screen.
Item Description
Item Description
Host The IP address or DNS-resolvable host name of the remote host to
receive log messages.
Status Indicates whether the host has been configured to be actively logging
or not.
Port The UDP port on the logging host to which syslog messages are sent.
Severity Filter Severity level threshold for log messages. All log messages with a
severity level at and above the configured level are forwarded to the
logging host.
Refresh Click Refresh to update the screen.
Add Click Add to add a new host.
Edit Click Edit to edit the selected entries.
Remove Click Remove to remove the selected entries.