Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 117 / 326

EKI-9500 Series User Manual 98
4.3.5.7 DHCP Client Options
Use the DHCP Client Options page to configure DHCP client settings on the system.
To access this page, click System > Connectivity > DHCP Client Options .
Figure 4.95 System > Connectivity > DHCP Client Options
The following table describes the items in the previous figure.
4.3.6 Firmware
4.3.6.1 Status
Use the Dual Image Status page to view information about the software images on
the device. The device can store up to two software images in permanent storage.
The dual image feature allows you to upgrade the device without deleting the older
software image.
To access this page, click System > Firmware > Status .
Figure 4.96 System > Firmware > Status
The following table describes the items in the previous figure.
4.3.6.2 Configuration and Upgrade
Use the Dual Image Configuration and Upgrade page to transfer a new firmware
(code) image to the device, select which image to load during the next boot cycle,
Item Description
DHCP Vendor Class
ID Mode The VCI administrative mode. When the mode is enabled, the DHCP
client includes the text configured as the DHCP Vendor Class ID
String in DHCP requests.
DHCP Vendor Class
ID String The text string to add to DHCP requests as option 60, the VCI option.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.
Item Description
Unit The unit ID of the switch.
Active The code file version of the active image.
Backup The code file version of the backup image.
Current Active The image version that is loaded and running on this unit.
Next Active The image version to be loaded after the system reboots.
Image Description
Active The description associated with the active code file.
Backup The description associated with the backup code file.
Refresh Click Refresh to update the screen.