Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 114 / 326

95 EKI-9500 Series User Manual
4.3.5.5 Service Port IPv6
Use the Service Port IPv6 Configuration page to configure IPv6 network information
on the service port. The service port is a dedicated Ethernet port for out-of-band
management of the device. Traffic on this port is segregated from operational net-
work traffic on the switch ports and cannot be switched or routed to the operational
network.
To access this page, click System > Connectivity > Service Port IPv6 .
Figure 4.92 System > Connectivity > Service Port IPv6
The following table describes the items in the previous figure.
DHCP Client Identi-
fier The DHCP Client Identifier (Option 61) is used by DHCP clients to
specify their unique identifier. DHCP servers use this value to index
their database of address bindings. This value is expected to be
unique for all clients in an administrative domain. The Client Identifier
string will be displayed beside the check box once DHCP is enabled
on the port on which the Client Identifier option is selected. This web
page will need to be refreshed once this change is made.
IP Address The IP address of the interface. If the Service Port Configuration Pro-
tocol is None, you can manually configure a static IP address. If the
Service Port Configuration Protocol is BOOTP or DHCP, this field dis-
plays the IP address that was dynamically acquired (if any).
Subnet Mask The IP subnet mask for the interface. If the Service Port Configuration
Protocol is None, you can manually configure a static subnet mask. If
the Service Port Configuration Protocol is BOOTP or DHCP, this field
displays the subnet mask that was dynamically acquired (if any).
Default Gateway The default gateway for the IP interface. If the Service Port Configura-
tion Protocol is None, you can manually configure the IP address of
the default gateway. If the Service Port Configuration Protocol is
BOOTP or DHCP, this field displays the default gateway address that
was dynamically acquired (if any).
Interface Status Indicates whether the link status is up or down.
Burned In MAC
Address The burned in MAC address used for out-of-band connectivity.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Renew DHCP Lease Click Renew DHCP Lease to renew DHCP lease.
Cancel Click Cancel to restore default value.
Item Description
Item Description
IPv6 Mode Enables or disables the IPv6 administrative mode on the service port.
Service Port Configu-
ration Protocol Specify whether the device should attempt to acquire network infor-
mation from a DHCPv6 server. Selecting None disables the DHCPv6
client on the service port.