Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 111 / 326

EKI-9500 Series User Manual 92
4.3.5.2 IPv6
Use the IPv6 Network Connectivity page to configure and view IPv6 information on
the network interface. The network interface is the logical interface that allows remote
management of the device via any of the front-panel switch ports. To enable manage-
ment of the device over an IPv6 network by using a Web browser, SNMP, Telnet, or
SSH, you must first configure the device with the appropriate IPv6 information. The
configuration parameters associated with the network interface do not affect the con-
figuration of the front-panel ports through which traffic is switched or routed.
To access this page, click System > Connectivity > IPv6 .
Figure 4.88 System > Connectivity > IPv6
The following table describes the items in the previous figure.
Item Description
IPv6 Mode Enables or disables the IPv6 administrative mode on the network
interface.
Network Configura-
tion Protocol Specify whether the device should attempt to acquire network infor-
mation from a DHCPv6 server. Selecting None disables the DHCPv6
client on the network interface.
IPv6 Stateless
Address AutoConfig
Mode Sets the IPv6 stateless address auto configuration mode on the net-
work interface.

Enabled: The network interface can acquire an IPv6 address
through IPv6 Neighbor Discovery Protocol (NDP) and through
the use of Router Advertisement messages.

Disabled: The network interface will not use the native IPv6
address auto configuration features to acquire an IPv6 address.
DHCPv6 Client DUID The client identifier used by the DHCPv6 client (if enabled) when
sending messages to the DHCPv6 server.
IPv6 Gateway The default gateway for the IPv6 network interface. To configure this
field, click button in the row. To reset the field to the default value,
click button in the row.
Static IPv6
Addresses Lists the manually configured static IPv6 addresses on the network
interface.

To add an entry to the list, click button to open the Add IPv6
Address dialog and provide the following:
–
New IPv6 Address: Specify the IPv6 address to add to the
interface.
–
EUI Flag: Select this option to enable the Extended Universal
Identifier (EUI) flag for IPv6 address, or clear the option to
omit the flag.

To delete an entry from the list, click button associated with
the entry to remove.

To delete all entries from the list, click button in the heading
row.