Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 105 / 326

EKI-9500 Series User Manual 86
To add a new policy list:
Click System > Advanced Configuration > Event Manager > Policy List > Add .
Figure 4.79 System > Advanced Configuration > Event Manager > Policy List >
Add
The following table describes the items in the previous figure.
Policy Selection
Use the Policy List Selection page to associate a policy list with each event alarm
method (Alarm LED, Alarm Relay, Alarm Relay 2, Alarm Email, Logging, and SNMP
Traps).
To access this page, click System > Advanced Configuration > Event Manager >
Policy Selection .
Figure 4.80 System > Advanced Configuration > Event Manager > Policy
Selection
Item Description
List Name The name of the policy list. This field can be configured only when
adding a new policy list.
Event Options The method(s) used to authenticate a user who attempts to access
the management interface or network. The possible methods are as
follows:

Link Change Members: The port(s) included in the link-change
event. If the event that meets the policy criteria that is in the Link
Change Members list, it is applied to Alarm LED, Alarm Relay,
Alarm Relay 2, Logging, or Trap. To add source ports to the pol-
icy, select one or more ports from the Available Port List field
(CTRL + click to select multiple ports). Then, use the appropriate
arrow icon to move the selected ports to the Link Change Mem-
bers field.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.