Advantech EKI-9228G-8CMI, Руководство пользователя

Страница: 49 / 324

31 EKI-9228G Series User Manual
To access this page, click System > Advanced Configuration > DHCP Server >
Global.
Figure 4.10 System > Advanced Configuration > DHCP Server > Global
The following table describes the items in the previous figure.
Excluded Addresses
Use the DHCP Server Excluded Addresses page to view and configure the IP
addresses the DHCP server should not assign to clients.
To access this page, click System > Advanced Configuration > DHCP Server >
Excluded Addresses.
Figure 4.11 System > Advanced Configuration > DHCP Server > Excluded
Addresses
The following table describes the items in the previous figure.
Item Description
Admin Mode Enables or disables the DHCP server administrative mode. When
enabled, the device can be configured to automatically allocate TCP/
IP configurations for clients.
Conflict Logging
Mode Enables or disables the logging mode for IP address conflicts. When
enabled, the system stores information IP address conflicts that are
detected by the DHCP server.
Bootp Automatic
Mode Enables or disables the BOOTP automatic mode. When enabled, the
DHCP server supports the allocation of automatic addresses for
BOOTP clients. When disabled the DHCP server supports only static
addresses for BOOTP clients.
Ping Packet Count The number of packets the server sends to a pool address to check
for duplication as part of a ping operation. If the server receives a
response to the ping, the address is considered to be in conflict and is
removed from the pool.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.
Item Description
From The IP address to exclude. In a range of addresses, this value is the
lowest address to exclude.