Advantech EKI-9226G Series Скачать руководство пользователя страница 69

Страница: 69 / 169

EKI-9226G Series User Manual

Multicast Groups

To access this page, click

L2 Switching

Multicast

IGMP Snooping

Multicast

Groups

The ensuing table for

Multicast Groups

settings are informational only: VLAN ID,

Group IP Address, Member Ports, Type and Life (Sec).

Router Ports

To access this page, click

L2 Switching

Multicast

IGMP Snooping

Router

Ports

The ensuing table for

Router Ports

settings are informational only: VLAN ID, Port

and Expiry Time (Sec).

4.5.8.3

MLD Snooping

The MLD Snooping page allows you to select the snooping status (enable or dis

able), the version (v1 or v2) and the enabling/disabling of the report suppression for

the MLD querier, which sends out periodic general MLD queries and are forwarded

through all ports in the VLAN.

MLD Settings

To access this page, click

L2 Switching

Multicast

MLD Snooping

MLD Set

tings

Figure 4.37 L2 Switching > Multicast > MLD Snooping > MLD Settings

The following table describes the items in the previous figure.

The ensuing table for

MLD Snooping Information

settings are informational only:

MLD Snooping State, MLD Snooping Version and MLD Snooping V2 Report Sup

pression.
The ensuing table for

MLD Snooping Table

settings are informational only: Entry

No., VLAN ID, MLD Snooping Operation State, Router Ports Auto Learn, Query

Robustness, Query Interval (sec.), Query Max Response Interval (sec.), Last Mem

ber Query count, Last Member Query Interval (sec), Immediate Leave and

Edit

(click

to modify the settings).

Item

Description

MLD Snooping State Select

Enable

Disable

to setup the MLD Snooping State.

MLD Snooping Ver

sion

Select the querier version (V1 or V2) designated to the MLD Snooping

Version.

MLD Snooping

Report Suppression

Select

Enable

Disable

to designate the status of the report sup

pression.

Apply

Click

Apply

to save the values and update the screen.

Содержание EKI-9226G Series










































































































































































Результаты поиска

Содержание EKI-9226G Series

Отзывы:

Похожие инструкции для EKI-9226G Series

Бренды по названию

Популярные бренды

Advantech EKI-9226G Series, Руководство пользователя

Результаты поиска

Содержание EKI-9226G Series

Отзывы:

Похожие инструкции для EKI-9226G Series

Бренды по названию

Популярные бренды