Advantech EKI-9226G Series, Руководство пользователя

Страница: 142 / 169

EKI-9226G Series User Manual 129
The ensuing table for Local Logging Settings Status settings are informational
only: Status, Target, Severity and Delete (click to delete the desired target).
4.10.4.3 System Log Server
The System Log Server page allows you to configure the log server.
To access this page, click
Diagnostics > System Log > System Log Server .
Figure 4.136 Diagnostics > System Log > System Log Server
The following table describes the items in the previous figure.
Severity Click the drop-down menu to select the severity level for local log
messages.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
Server Address Enter the IP address of the log server.
Server Port Enter the Udp port number of the log server.
Severity Click the drop-down menu to select the severity level for local log
messages. The default is emerg.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages