Advantech EKI-8500 Series, Руководство пользователя

Страница: 66 / 98

EKI-8500 Series User Manual 55
4.3.4.13 QoS Control List
This function shows the QoS Control List (QCL) consisting of the QCEs. Each row
describes a defined QCE. The maximum number of QCEs is 256 on each switch.
Click on the lowest plus sign to add a new QCE to the list.
1. Navigate to Configuration > QoS and click QoS Control List .
The QoS Control List Configuration page displays.
Figure 4.28 QoS Control List Configuration
The following table describes the items in the previous figure.
Key-Type Indicates the Key Type that will be used to filter the map rules when
applying the map. As mentioned above, map rules can have various
keys and this is to make a select set of them. Possible Key types are:
CoS ID: Use classified COS ID as key. Table width: 1
CoS ID - DPL: Use classified COS ID and DPL as key. Table width: 4
DSCP: Use classified DSCP as key. Table width: 8
DSCP - DPL: Use classified DSCP and DPL as key. Table width: 32
QoS Egress Map
Modification Buttons
It is possible to modify each map (or add new maps) in the table using
the following buttons:

Edit : Edits the map.

Delete : Deletes the map.

Add : Adds a new map in the table.
Refresh Click Refresh to refresh the page.
Remove All Click Remove All to remove all Ingress Maps (and their
corresponding rules).
Item Description
Item Description
QCE Indicates the QCE ID.
Port Indicates the list of ports configured with the
QCE
or
Any
.
DMAC Indicates the destination MAC address. Possible values are:

Any (default):
Match any DMAC

Unicast:
Match unicast DMAC

Multicast:
Match multicast DMAC

Broadcast:
Match broadcast DMAC

<MAC>:
Match specific DMAC
SMAC Match specific source MAC address or
Any
.
Tag Type Indicates tag type. Possible values are:

Any (default):
Match tagged and untagged frames.

Untagged:
Match untagged frames.

Tagged:
Match tagged frames.

C-Tagged:
Match C-tagged frames.

S-Tagged:
Match S-tagged frames.