Advantech EKI-8500 Series, Руководство пользователя

Страница: 56 / 98

EKI-8500 Series User Manual 45
4.3.4.2 Port Policing
This function allows you to configure the Policer settings for all switch ports.
1. Navigate to Configuration > QoS and click Port Policing .
The QoS Ingress Port Policer page displays.
Figure 4.15 QoS Ingress Port Policer
The following table describes the items in the previous figure.
4.3.4.3 Queue Policing
This function allows you to configure the Queue Policer settings for all switch ports.
1. Navigate to Configuration > QoS and click Quene Policing .
Ingress Map Enter the string to indicate the ID for the Ingress Map (range: 0 to
255). An empty field indicates no map selection.
Egress Map Enter the string to indicate the ID for the Egress Map (range: 0 to 511).
An empty field indicates no map selection.
Save Click Save to create a new user account.
Reset Click Reset to clear the settings.
Item Description
Item Description
Port Displays the port number for the entry.
Enable Click to enable or disable (default) the port policer for the port.
Rate Enter the string to indicate the control rate of the port policer (values:
10 to 13128147 for kbps, 1 to 13128 Mbps/fps/kfps).
Unit Click the drop-down menu to select the measurement unit. Options:
 kbps
 Mbps
 fps
 kfps
Flow Control Click to enable or disable (default) flow control mode.
If flow control is enabled and the port is in flow control mode, then
pause frames are sent instead of discarding frames.
Save Click
Save
to create a new user account.
Reset Click Reset to clear the settings.