Advantech EKI-7720 Series, Руководство пользователя

Страница: 133 / 175

118 EKI-7720 Series User Manual
To access this page, click Management > SNMP > SNMP Trap .
Figure 4.185 Management > SNMP > SNMP Trap
The following table describes the items in the previous figure.
The ensuing table for Trap Host Status settings are informational only: No., IP
Address, Community Name, Version and Delete (click to delete the desired IP
address).
4.9.3 Power Over Ethernet
Power Over Ethernet is the function supplying power to Powered Devices (PD)
through the switch in the event that AC power is not readily available.
Power over Ethernet can be used for the following areas:

Surveillance devices

I/O sensors for security requirements

Wireless access points
4.9.3.1 PoE System Settings
The PoE System Settings page allows you to configure the overload disconnect and
the maximum available wattage.
To access this page, click
Management > Power Over Ethernet > PoE System
Settings .
Figure 4.186 Management > Power Over Ethernet > PoE System Settings
Item Description
IP Address Enter the IP address to designate the SNMP trap host.
Community Name/
User Name
Click the drop-down menu to select a defined community name.
Version Click the drop-down menu to designate the SNMP version credentials
(v1, v2c - trap, v2c - inform, v2c - trap or v2c - inform).
Add Click Add to save the values and update the screen.
Series Supported Models
EKI EKI-7720G-4FPI