Advantech EKI-7710 Series, Руководство пользователя

Страница: 101 / 156

88 EKI-7710 Series User Manual
To access this page, click
QoS
>
Rate Limit
>
Ingress Bandwidth Control
.
Figure 4.77 QoS > Rate Limit > Ingress Bandwidth Control
The following table describes the items in the previous figure.
The ensuing table for
Ingress Bandwidth Control Status
settings are informational
only: Port and Ingress Rate Limit (Kbps).
4.8.3.2 Egress Bandwidth Control
The Egress Bandwidth Control page allows you to set the egress bandwidth control
for a listed port.
To access this page, click
QoS
>
Rate Limit
>
Egress Bandwidth Control
.
Figure 4.78 QoS > Rate Limit > Egress Bandwidth Control
The following table describes the items in the previous figure.
The ensuing table for
Egress Bandwidth Control Status
settings are informational
only: Port and Egress Rate Limit (Kbps).
4.8.3.3 Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
Item Description
Port Enter the port number for the rate limit setup.
State Select
Disabled
or
Enabled
to set the port’s state status.
Rate (Kbps) Enter the value in Kbps (16 to 1000000) to set as the bandwidth rate
for the selected port.
Apply Click
Apply
to save the values and update the screen.
Item Description
Port Enter the port number to set the Egress Bandwidth Control.
State Select
Disabled
or
Enabled
to set the Egress Bandwidth Control
state.
Rate (Kbps) Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth
rate.
Apply Click
Apply
to save the values and update the screen.