Advantech EKI-7706 Series, Руководство пользователя

Страница: 123 / 165

110 EKI-7706 Series User Manual
The ensuing table for TCP Modbus Status lists the following settings (informational
only):
TCP Modbus status and TCP Modbus time out
4.9.4 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is a network protocol enabling a
server to automatically assign an IP address to a computer from a defined range of
numbers configured for a given network.
4.9.4.1 Status Settings
The Status Settings page allows you to configure the DHCP server mode (enabled or
disabled).
To access this page, click Management > DHCP Server > Status Settings .
Figure 4.113 Management > DHCP Server > Status Settings
The following table describes the items in the previous figure.
The ensuing table for Status Information lists the following settings (informational
only):
DHCP Server Service
Time out Enter the value (1 to 86400) to define the timeout period between
transport time.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
DHCP Server Select Enable or Disable to designate the DHCP server function
type.
When a new DHCP server mode is selected, the switch requires a
system restart for the new mode to take effect.
Apply Click Apply to save the values and update the screen.
Restart Click Restart to have the switch perform a system restart function. In
the event that the IP settings are changed, the DHCP server must be
restarted for the IP settings to take effect.