Advantech EKI-7556MI Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 105

Advantech EKI-7556MI Скачать руководство пользователя страница 4

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to
protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,
we strongly recommend the use of CE-compliant industrial enclosure products.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at

www.advantech.com/support

where you can find

the latest information about the product.

Step 2.    Contact your distributor, sales representative, or Advantech’s customer service
              center for technical support if you need additional assistance. Please have the
                following information ready before you call:

- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, application software
etc.)
- A complete description of the problem
- The exact wording of any error messages

EKI-7556MI_Manual

iv

«
...
2
3
4
5
6
...
»

Содержание EKI-7556MI










































































































Отзывы:

Нет отзывов