Advantech EKI-6558TI, Руководство пользователя

Страница: 37 / 99

The following table lists the CLI commands and description.
3.1.1 Commands Level
Table 3.2: Command Level
Modes Access Method Prompt Exit Method About This Model
User EXEC
Begin a session with
your switch.
switch>
Enter
logout
or
quit
. The user commands available
at the user level are a subset
of those available at the
privileged level.
Use this mode to
•
Perform basic tests.
•
Display system information.
Privileged
EXEC
Enter the
enable
command while in
user EXEC mode.
switch#
Enter
disable
to exit. The privileged commands are
the advanced mode. Use this
mode to
•
Display advanced function
status
•
Save configuration
Global
Configuration
Enter the
configure
command while in
privileged EXEC
mode.
switch(config)#
To exit to the
Privileged EXEC
mode, enter
exit
or
end
Use this mode to configure the
parameters to be applied to
your switch
VLAN database
Enter the
vlan
database
command
while in privileged
EXEC mode.
switch(vlan)#
To return to the User
EXEC mode, enter
exit
.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the
interface
command with a
specific interface
while in the Global
Configuration mode
switch(config-if)#
To return to the
previous mode, enter
exit
or
end
.
Use this mode to configure the
parameters for the switch and
Ethernet ports.
3.1.2 Commands Set List
Table 3.3: Commands Set List
Command Code Word
User EXEC E
Privileged EXEC P
Global configuration G
VLAN database V
Interface configuration I
27 Chapter3