Advantech EKI-6333AC-M12 Series, Руководство пользователя

Страница: 31 / 38

EKI-6333AC-M12 Series User Manual 23
3.4.2.5 Access Control
The Access Control feature is only available when the wireless mode of the device is
set to AP, see “Basic” on page 20.
Access Control allows for an administrator to allow or deny access by defining
specific devices through their MAC address.
To access this page, click Wireless Settings > WLAN > Access Control .
Figure 3.10 Wireless Settings > WLAN > Access Control
The following table describes the items in the previous figure.
Tx packets/bytes Displays the total Tx packets and corresponding bytes.
Rx packets/bytes Displays the total Rx packets and corresponding bytes.
Wlan status
TX packets Display the current Tx packets.
TX bytes Display the current Tx bytes.
RX packets Display the current Rx packets.
RX bytes Display the current Rx bytes.
Item Description
Item Description
Access Control Method Click the drop-down menu to set the access control method:
Disable, Deny or Allow.
In the Deny or Allow menu, enter the MAC address of the target
device - support for up to 32 target devices.
Submit Click Submit to save the values and update the screen.