Advantech EKI-6333AC-2G Series, Руководство пользователя

Страница: 44 / 56

36 EKI-6333AC-2G Series User Manual
3.3.3.7 Access Control
The Access Control feature is only available when the wireless mode of the device is
set to AP, see “Management” on page 40.
Access Control allows for an administrator to allow or deny access by defining
specific devices through their MAC address.
To access this page, click Wireless - 2.4GHz > Access Control .
Figure 3.20 Wireless - 2.4GHz > Access Control
The following table describes the items in the previous figure.
3.3.3.8 Site Survey
The Site Survey feature is only available when the wireless mode of the device is set
to Client or Bridged Repeater mode, see “Management” on page 40.
To access this page, click Wireless - 2.4GHz > Site Survey .
Figure 3.21 Wireless - 2.4GHz > Site Survey
Item Description
SSID Click the drop-down menu to select the SSID from the list of
already created wireless networks.
Access Control Method Click the drop-down menu to set the access control method:
Disable, Deny or Allow.
In the Deny or Allow menu, enter the MAC address of the target
device - support for up to 32 target devices.
Submit Click Submit to save the values and update the screen.
Item Description
Refresh Click to update the displayed AP list table.
AP list
SSID Displays the name of the listed AP.
BSSID Displays the basic service set identifiers (BSSID) used to describe
the section of the SSID.
Frequency Displays the radio frequency of the listed SSID.
Signal level Displays the signal level of the listed SSID.
Encryption Displays the encryption type assigned to the listed SSID.