manualshive.com logo in svg

Advantech EKI-6333AC-2G Series, Руководство пользователя

Поделиться
Скачать
Advantech EKI-6333AC-2G Series Скачать руководство пользователя страница 39

EKI-6333AC-2G Series User Manual

31

Client Settings

The Client Settings as displayed in the following figure are available when the 
operation mode (Wireless Network) is set to client. 

To access this page, click 

Wireless - 2.4GHz

 > 

Advanced

.

Figure 3.14 Wireless - 2.4GHz > Advanced

The following table describes the items in the previous figure.

Short Guard Interval

Click the drop-down menu to enable/disable the short guard 
interval. In 802.11 operation, the guard interval is 800ns. The short 
guard interval time is 400ns to allow for an increased throughput. 

Submit

Click 

Submit 

to save the values and update the screen.

Item

Description

Client Settings

Roam

Click to enable or disable the roaming function allowing it to 
automatically switch to another AP with a better signal strength.

Watchdog

Click to disable the function, disassociate or ping a specific IP 
address. 
The function stops unsecured wireless LAN usage across the
network.

Disassociation: Transmits disassociation and 
deauthentication frames to prevent client association. 
Detected rogue WLANs.

Ping: The feature pings a specified IP address. If there is no 
response to the pings, the AP performs one of the following 
functions: Restart WiFi, Reboot, or Force Re-association.

Watchdog Action

Available when Watchdog is set to disassociate. 
Click the drop-down menu to associate a response to the 
Watchdog event, options: Restart WiFi, Reboot, Force 
Reassociation.

Disassociate Timer

Available when Watchdog is set to disassociate. 

Ping Target

Available when Watchdog is set to ping. 
Enter the IP address to target when watchdog ping is activated.

Ping Waittime

Available when Watchdog is set to ping. 
Enter the value in seconds to designate the interval between 
pings. 

Item

Description

Содержание EKI-6333AC-2G Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды