Advantech EKI-6233BN Скачать руководство пользователя страница 38

Страница: 38 / 79

EKI-6233BN User Manual

You can choose from four possible IP Configuration modes --- Static, DHCP, BOOTP,

and DHCP/BOOTP.

Figure 3.11 Network Settings Overview

Item

Description

Static IP

Static IPUser defined IP address, Subnet Mask, and Default Gateway.

DHCP + Auto-IP

DHCP Server assigned IP address, Subnet Mask, Default Gateway,

and DNS.

BOOTP + Auto-IP

BOOTP Server assigned IP address.

DHCP + BOOTP +

Auto-IP

DHCP Server assigned IP address, Subnet Mask, Default Gateway,

and DNS, or BOOTP Server assigned IP address. (If the DHCP

Server does not respond)

DHCP Advanced

Setting

When you enabling DHCP protocol to get IP address, it will be waited

DHCP server to give IP within DHCP time out. The default value is

180 seconds.

DNS Setting

In order to use DNS feature, you need to set the IP address of the

DNS server to be able to access the host with the domain name. The

EKI-6233BN

device provides Primary DNS Server and Secondary

DNS Server configuration items to set the IP address of the DNS

server. Secondary DNS Server is included for use when Primary DNS

server is unavailable.

Note!

When you have finished the configuration of these settings for each

category, please press the “Apply” button in order to make these

settings effective on the device.

Содержание EKI-6233BN
















































































Результаты поиска

Содержание EKI-6233BN

Отзывы:

Похожие инструкции для EKI-6233BN

Бренды по названию

Популярные бренды

Advantech EKI-6233BN, Руководство пользователя

Результаты поиска

Содержание EKI-6233BN

Отзывы:

Похожие инструкции для EKI-6233BN

Бренды по названию

Популярные бренды