1 Startup Manual
ST
AR
TUP MANUAL
EKI-3525M/3525S
Industrial Unmanaged Fiber Optic Ethernet Switch
The EKI-3525M/S are a new generation of products
and have four 10/100 Mbps Ethernet ports, and one
multi-mode or single-mode fiber-optic port. Using
fiber-optics, you can prevent noise from interfering
with your system and support high-speed (100 Mbps)
and high-distance (up to 30 km) transmissions. A low
power Ethernet design automatically adjusts power
consumption by detecting the link status and cable
length. Designed with one "VIP" port to get optimal
bandwidth for media traffic through the VIP port
users can experience better multimedia streaming
performance through the prioritized bandwidth set-
ting. The devices come with compact metal and plas-
tic housing that is IP40 rated to protect against dusty
industrial environments. The wide power input
power (8.4 to 52. VDC) is dedicated to operating in
areas of unstable power and rugged environments. It
also provides an event alarm and in the event of a
power failure and connection loop, the integrated
LED will activate the alarm to notify administrators.
Before installation, please make sure that you have
received the following:
• 1 x EKI-3525M or EKI-3525S Industrial Unman-
aged Fast Ethernet Switch
• 1 x Wall mounting bracket
• 1 x DIN-rail Mounting Bracket and Screws
• 1 x EKI-3525M or 3525S startup manual
If anything is missing or damaged, contact your
distributor or sales representative immediately.
General
• Compatibility
:
IEEE 802.3, 802.3u, 802.3x,
802.3az, 802.1P
• LAN: 10/100Base-TX
• Ethernet RJ
-
45: Up to 100 m
• Optical Fiber
Multi-Mode (EKI-3525M)
Wavelength:1310nm
Tx Power: -14/-20 dBm
Rx Sensitivity: -31 dBm
Parameters: 50/125 um, 62.5/125 um
Single-Mode (EKI-3525S)
Wavelength: 1310 nm
Tx Power: -8/-15 dBm
Rx Sensitivity: -34 dBm
Parameters: 9/125 um
• Connectors: 4 x RJ45 ports + 1 x SC type fiber
connector
6-pin removable screw terminal (Power &
Relay)
• Switch
Architecture
:
Store and Forward
• Power
Requirement: 12~48V
DC
, Redundant
Power Input with reverse polarity protection.
• Power
Consumption
:
1.5 Watts
• Dimensions
(W x H x D)
:
27x120x85 mm
• Enclosure
:
IP40
• Operating Temperature: -10 ~ 60°C
(14°F~140°F)
• Storage Temperature: -40 ~ 85°C (-40°F~185°F)
• Operating/Storage Humidity:
5%~95%
(noncondensing)
• Safety: UL60950
• EMC: FCC Class A, CE
• Warranty:
5 years
Overview
Specifications
Packing List
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com/support/
1st Edition
November 2013
1 Startup Manual
ST
AR
TUP MANUAL
EKI-3525M/3525S
Industrial Unmanaged Fiber Optic Ethernet Switch
The EKI-3525M/S are a new generation of products
and have four 10/100 Mbps Ethernet ports, and one
multi-mode or single-mode fiber-optic port. Using
fiber-optics, you can prevent noise from interfering
with your system and support high-speed (100 Mbps)
and high-distance (up to 30 km) transmissions. A low
power Ethernet design automatically adjusts power
consumption by detecting the link status and cable
length. Designed with one "VIP" port to get optimal
bandwidth for media traffic through the VIP port
users can experience better multimedia streaming
performance through the prioritized bandwidth set-
ting. The devices come with compact metal and plas-
tic housing that is IP40 rated to protect against dusty
industrial environments. The wide power input
power (8.4 to 52. VDC) is dedicated to operating in
areas of unstable power and rugged environments. It
also provides an event alarm and in the event of a
power failure and connection loop, the integrated
LED will activate the alarm to notify administrators.
Before installation, please make sure that you have
received the following:
• 1 x EKI-3525M or EKI-3525S Industrial Unman-
aged Fast Ethernet Switch
• 1 x Wall mounting bracket
• 1 x DIN-rail Mounting Bracket and Screws
• 1 x EKI-3525M or 3525S startup manual
If anything is missing or damaged, contact your
distributor or sales representative immediately.
General
• Compatibility
:
IEEE 802.3, 802.3u, 802.3x,
802.3az, 802.1P
• LAN: 10/100Base-TX
• Ethernet RJ
-
45: Up to 100 m
• Optical Fiber
Multi-Mode (EKI-3525M)
Wavelength:1310nm
Tx Power: -14/-20 dBm
Rx Sensitivity: -31 dBm
Parameters: 50/125 um, 62.5/125 um
Single-Mode (EKI-3525S)
Wavelength: 1310 nm
Tx Power: -8/-15 dBm
Rx Sensitivity: -34 dBm
Parameters: 9/125 um
• Connectors: 4 x RJ45 ports + 1 x SC type fiber
connector
6-pin removable screw terminal (Power &
Relay)
• Switch
Architecture
:
Store and Forward
• Power
Requirement: 12~48V
DC
, Redundant
Power Input with reverse polarity protection.
• Power
Consumption
:
1.5 Watts
• Dimensions
(W x H x D)
:
27x120x85 mm
• Enclosure
:
IP40
• Operating Temperature: -10 ~ 60°C
(14°F~140°F)
• Storage Temperature: -40 ~ 85°C (-40°F~185°F)
• Operating/Storage Humidity:
5%~95%
(noncondensing)
• Safety: UL60950
• EMC: FCC Class A, CE
• Warranty:
5 years
Overview
Specifications
Packing List
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com/support/
1st Edition
November 2013
1 Startup Manual
ST
AR
TUP MANUAL
EKI-3525M/3525S
Industrial Unmanaged Fiber Optic Ethernet Switch
T
he
EKI-
3525M/S are a new ge
neration of pr
oducts
and h
ave fo
ur 10
/100 Mb
ps Ethern
et ports, and on
e
multi-mode or single-mode fiber
-optic
port. Using
fiber-op
tics, yo
u can p
rev
ent noise from
interfering
with yo
ur system
and s
upport hig
h-speed
(100
Mbps)
and h
igh
-dis
tance (
up to 30 km)
transm
issions.
A low
power Etherne
t design automatically adjusts
power
consum
ption b
y detectin
g the link status and
cable
length. Designed wit
h one "VIP" port to get opti
mal
ban
dwidth
for media traf
fic through the VIP po
rt
users can experience be
tter multimedia strea
ming
performance t
hrough the
prioritized bandwidth set-
ting. The devices come wi
th compact metal
and plas-
tic housing
th
at is IP40 rated to protect against du
sty
industrial environme
nts.
The wide power
input
power (8.4
to 52.
VDC) is
dedicated
to opera
ting in
areas of
unstable power
an
d rugg
ed en
viro
nmen
ts. It
also provides an event al
arm and
in the
event of a
power failure and connecti
on loop, the
integrated
LED will
activate the
alarm
to notify administrators.
Before installation, ple
ase m
ake sur
e that you ha
ve
received the
following:
• 1 x EKI-352
5M o
r EKI
-352
5S Indus
trial Unman-
aged F
ast Ethernet
Switch
• 1 x Wall
moun
ting bracket
• 1 x DIN-rail Moun
ting Bracket and
Screws
• 1 x EKI-3525M
or
3525
S startup manual
If anythin
g is mis
sing or d
amaged, contact yo
ur
distributor or sales re
presentative
immediately
.
General
• Compatibility
:
IE
EE
802.
3, 802
.3u,
802.3
x,
802.3az, 80
2.1P
• LAN: 1
0/1
00Base-
TX
• Ethern
et RJ
-
45: Up to 100 m
• Optical Fiber
Multi-Mode (EKI-3525M)
Wavelength:13
10nm
Tx Power: -14/-20 dBm
Rx Sensitivity: -31 dBm
Parameters: 50/125 um, 62.5/125 um
Single-Mode (EKI-3525S)
Wavelength: 1
310 nm
Tx Power: -8/-15 dBm
Rx Sensitivity: -34 dBm
Parameters: 9/125 um
• Co
nnecto
rs: 4 x RJ45 por
ts + 1
x SC
ty
pe fi
ber
connecto
r
6-pin remov
able s
crew terminal
(Pow
er &
Relay)
• Switch
Architecture
:
Store and Forward
• Power
Requirement: 12~48V
DC
, Redund
ant
Power Input with revers
e polarity prot
ection.
• Power
Consump
tio
n
:
1.5 Watts
• Dimen
sions
(W x H x
D)
:
27x1
20x85 mm
• Enclos
ure
:
IP40
• Operating Tempe
rature: -10 ~
60°C
(14°F~140
°F)
• S
torag
e Temp
erature: -40 ~
85°C
(-40°F~185
°F)
• Operating/S
torag
e Humidity:
5%~95%
(non
conden
sing
)
• Safety
: UL60950
• EMC
: FCC Class A, CE
• Warr
anty:
5 years
Overview
Sp
ecifications
Packing
List
Notes
For m
ore
info
rmat
ion on
thi
s an
d othe
r Adva
ntec
h
product
s, pleas
e visi
t our
websit
es at:
http://w
ww.a
dvant
ech.c
om
/eAutomation
For technical s
upport
and service:
http://w
ww.ad
vantech.c
om/support
/
1st
Edit
ion
November 20
13
1 Startup Manual
ST
AR
TUP MANUAL
EKI-3525M/3525S
Industrial Unmanaged Fiber Optic Ethernet Switch
T
he
EKI-
3525M/S are a new ge
neration of pr
oducts
and h
ave fo
ur 10
/100 Mb
ps Ethern
et ports, and on
e
multi-mode or single-mode fiber
-optic
port. Using
fiber-op
tics, yo
u can p
rev
ent noise from
interfering
with yo
ur system
and s
upport hig
h-speed
(100
Mbps)
and h
igh
-dis
tance (
up to 30 km)
transm
issions.
A low
power Etherne
t design automatically adjusts
power
consum
ption b
y detectin
g the link status and
cable
length. Designed wit
h one "VIP" port to get opti
mal
ban
dwidth
for media traf
fic through the VIP po
rt
users can experience be
tter multimedia strea
ming
performance t
hrough the
prioritized bandwidth set-
ting. The devices come wi
th compact metal
and plas-
tic housing
th
at is IP40 rated to protect against du
sty
industrial environme
nts.
The wide power
input
power (8.4 to
52. VD
C) is dedicate
d to
operating in
areas of
unstable power
an
d rugg
ed en
viro
nmen
ts. It
also provides an event al
arm and
in the
event of a
power failure and connecti
on loop, the
integrated
LED will
activate the
alarm
to notify administrators.
Before installation, ple
ase m
ake sur
e that you ha
ve
received the
following:
• 1 x EKI-352
5M o
r EKI
-352
5S Indus
trial Unman-
aged F
ast Ethernet
Switch
• 1 x Wall
moun
ting bracket
• 1 x DIN-rail Moun
ting Bracket and
Screws
• 1 x EKI-3525M
or
3525
S startup manual
If anythin
g is mis
sing or d
amaged, contact yo
ur
distributor or sales re
presentative
immediately
.
General
• Compatibility
:
IE
EE
802.
3, 802
.3u,
802.3
x,
802.3az, 80
2.1P
• LAN: 1
0/1
00Base-
TX
• Ethern
et RJ
-
45: Up to 100 m
• Optical Fiber
Multi-Mode (EKI-3525M)
Wavelength:13
10nm
Tx Power: -14/-20 dBm
Rx Sensitivity: -31 dBm
Parameters: 50/125 um, 62.5/125 um
Single-Mode (EKI-3525S)
Wavelength: 1
310 nm
Tx Power: -8/-15 dBm
Rx Sensitivity: -34 dBm
Parameters: 9/125 um
• Co
nnecto
rs: 4 x RJ45 por
ts + 1
x SC
ty
pe fi
ber
connecto
r
6-pin remov
able s
crew terminal
(Pow
er &
Relay)
• Switch
Architecture
:
Store and Forward
• Power
Requirement: 12~48V
DC
, Redund
ant
Power Input with revers
e polarity prot
ection.
• Power
Consump
tio
n
:
1.5 Watts
• Dimen
sions
(W x H x
D)
:
27x1
20x85 mm
• Enclos
ure
:
IP40
• Operating Tempe
rature: -10 ~
60°C
(14°F~140
°F)
• S
torag
e Temp
erature: -40 ~
85°C
(-40°F~185
°F)
• Operating/S
torag
e Humidity:
5%~95%
(non
conden
sing
)
• Safety
: UL60950
• EMC
: FCC Class A, CE
• Warr
anty:
5 years
Overview
Sp
ecifications
Packing
List
Notes
For m
ore
info
rmat
ion on
thi
s an
d othe
r Adva
ntec
h
product
s, pleas
e v
isi
t our
websit
es at:
http://w
ww.a
dvant
ech.c
om
/eAutomation
For technical s
upport
and service:
http://w
ww.ad
vantech.c
om/support
/
1st Edi
tion
November 20
13
8
8
8
8
