Advantech EKI-1526, Руководство пользователя

Страница: 82 / 96

EKI-1526(TI) | 1528(TI) User Manual 70
The following table describes the items in the previous figure.
If you have set a password through the configuration utility or Telnet or serial console,
when you access the web configuration, you need to key in the password. It is not
necessary to enter the user name in the dialog.
If you want to disable the password protection, change the password to default option
None (leave the new password column blank). Be sure to press the Save button and
reboot the serial device server to make the change effective.
6.10.3 Secure access IP
The Secure Access IP function allows you to assign single or multiple user access to
data transmission through a serial device server.
Access is configured as follows: Set Access IP number to 0: unrestricted access
Set Access IP number to greater than 0: restricted to listed Access IP listing.
To access this page, click Management > Secure access IP .
Figure 6.17 Management > Secure access IP
The following table describes the items in the previous figure.
6.10.4 Export Device Settings
Export the server configuration settings to a .conf file.
To access this page, click Management > Export .
Click Export to export the serial device server settings.
Item Description
Old password Enter the old password.
New password Enter the character set for the define password type.
New password again Retype the password entry to confirm the profile password.
Save Click Save to save the values and update the screen.
Item Description
Access IP number Click the drop-down menu to select the number of IP addresses to
define (0 to 32). The default setting (0) disables this setting.
Save Click Save to save the values and update the screen.