Advantech EKI-1526/N/I/TI, Руководство пользователя

Страница: 47 / 107

33 EKI-1526(TI) | 1528(TI) User Manual
Click on each item to enter the configuration page to change the setting. The
configuration will be introduced in the following sections.
Figure 3.12 Viewing Basic Settings
3.4.3 Network Settings
Prior to setting up the server’s IP address, determine the IP address mode.
There are four mode types available:

Static IP: mode to assign a specific assigned address

DHCP / AutoIP: mode to automatically assign IP addresses through a DHCP
server

BOOTP / AutoIP: mode to automatically assign an IP address through the
configuration server

DHCP/BOOTP/AutoIP: mode to automatically assign an IP address using a
Bootstrap Protocol or DHCP server.
The server is set with the following default IP configuration:
10.0.0.1 (Eth1)
10.0.0.2 (Eth2)