manualshive.com logo in svg

Advantech EKI-1511L, Руководство пользователя

Поделиться
Скачать
Advantech EKI-1511L Скачать руководство пользователя страница 13

2

EKI-1511L User Manual

 

1.1

Overview

The EKI-1511L are designed to connect RS-232 serial devices such as PLC, meters,
sensors, and bar code readers to an IP-based Ethernet LAN. They allow nearly any
device with serial ports to connect and share an Ethernet network, while also
providing various operations such as COM port redirection (Virtual COM port), TCP
server, TCP client, and UDP mode. With COM port redirection mode, standard serial
operation calls are transparently redirected to the servers, guaranteeing compatibility
with legacy serial devices and enabling backward-compatibility with existing
software. With TCP server, TCP client, and UDP modes, EKI-1511L serial devices
ensure compatibility in network software using a standard network API. Moreover,
serial devices can be made communicate with other devices via peer-to-peer, thus
eliminating the need for an intermediate host PC and software programming.

1.2

Device Features

1 x 10/100 Mbps Ethernet port

Provides COM port redirection (Virtual COM), TCP, and UDP operation modes

Baud rate supports up to 230.4 kbps

Allows a maximum of 5 hosts to access one serial port

Allows a maximum of 16 hosts to be accessed in TCP client mode

Built-in 8-kV ESD protection for all serial signals

Provides rich configuration methods including a Windows utility, Telnet console, 
and web browser

Supports 32/64-bit Windows 2000/XP/Vista/7/8/8.1/10, Windows Server 2003/
2008/2012, and Linux

Содержание EKI-1511L
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды