Advantech EKI-1242 Series, Руководство пользователя

Страница: 55 / 64

EKI-1242 Series User Manual 44
The following table describes the items in the previous figure.
3.5.4 PROFINET Setting
On the PROFINET network, the gateway transmits mapped data to PROFINET I/O
Slot.
There are two types of slot mappings as defined in the following figure.
The PROFINET Setting page is only available for EKI-1242PNMS/EKI-1242IPNMS.
To access this page, click
Protocol Setting
>
PROFINET Setting
.
Figure 3.21 Protocol Setting > PROFINET Setting
The following table describes the items in the previous figure.
Item Description
Device Status/
Control Word in I/O
Map
Select
Enabled
to dedicate the first two I/O mapped bytes for status/
control information (default:
Enabled
).
Exception Code in I/
O Map
Select
Enabled
to dedicate the last 64 bytes of data from the
EtherNet/IP network stream (default:
Enabled
).
Submit Click
Submit
to save the values and update the screen.
Item Description
Device Status/
Control Word in Slot
When enabled, Device Status/Control Word should be in PROFINET
slot 1. The Modbus exception codes should be in PROFINET I/O slot
2.
When disabled, the Modbus exception codes should be in PROFINET
I/O slot 1.
Default value is
Disabled
.
Exception Code in
Slot
Enable to use the Modbus exception code setting, see Device Status/
Control Word in Slot in the previous definition.
Read Only
Community
Enter the value for the SNMP Read Only Community string
(default: public).
Read / Write
Community
Enter the value for the SNMP Read/Write Community string
(default: private).
Submit Click
Submit
to save the values and update the screen.