Advantech EKI-1200-CE Series, Руководство пользователя

Страница: 65 / 67

55 EKI-1200-CE Series User Manual
4.8.2 Reboot
The configuration will take effect after clicking Save button. But all configurations are
saved to flash memory after a system reboot. Press the Reboot button and the sys-
tem will give a reset response. It will take a few seconds to reconnect with the new
values.
To access this page, click Tools > Reboot .
Figure 4.18 Tools > Reboot
Click Yes to reboot the serial device server. Any configuration changes you have
made since the last time you issued a save will be lost.
4.9 Management
The EKI serial device server allows for easy installation and maintenance and reli-
able maintenance access from anywhere. With the reliable management tools avail-
able, you can streamline staffing and troubleshooting requirements to a centralized
system.
4.9.1 Change Password
The Change Password function allows you to easily update your current password
from a single menu.
To access this page, click Management > Change Password .
Figure 4.19 Management > Change Password
The following table describes the items in the previous figure.
If you have set a password through the configuration utility or Telnet or serial console,
when you access the web configuration, you need to key in the password. It is not
necessary to enter the user name in the dialog.
If you want to disable the password protection, change the password to the default
option
None (leave the new password column blank). Be sure to press the Save but-
ton and reboot the serial device server to make the change effective.
Item Description
Old password Enter the old password.
New password Enter the character set for the define password type.
New password again Retype the password entry to confirm the profile password.
Save Click Save to save the values and update the screen.