Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 64

Страница: 64 / 81

Integrated UPS

64 / 81

DLT-V4108 Manual, V01 Prelim

Advantech-DLoG

17.

Integrated UPS

The DLT-V4108 has an integrated uninterrupted power supply (UPS). The battery pack (lithium-

ion technology) of the UPS is located inside of back cover.

Only the manufacturer and its authorized service centers may open the DLT-V4108 device

and insert/remove the battery pack.

WARNING

Personal injury from battery packs: Short-circuit, fire, chemical burns, toxic substances.

The integrated UPS battery packs can ignite if the DLT-V4108 is handled improperly (risk of

fire), cause chemical burns or release toxic substances.

−

Use care when handing the DLT-V4108.

−

Do not damage the DLT-V4108; otherwise lithium-ion battery packs could be damaged.

−

Do not allow the DLT-V4108 to come into contact with fire.

−

Provide sufficient ventilation.

−

Observe the specific IP protection class.

−

Only use the DLT-V4108 within the permitted temperature and humidity range.

To charge the battery packs of the integrated UPS:

−

Connect the properly installed DLT-V4108 to the main supply voltage.

−

Provide for sufficient ventilation of the DLT-V4108 when charging the battery packs.

Performance specifications Li-ion rechargeable battery pack; 2 cells of UR14650R (900 mAh)

Bridging time

Typically 15 minutes (when battery pack is fully charged)

Charging time

2 h (fully recharge a completely discharged battery pack)

UPS charging temperature

0 to +45 °C (ambient temp.)

UPS discharging

temperature

-20 to + 50 °C

Output power

6.48 W

Battery voltage

7.2 V

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды