Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 36

Страница: 36 / 81

Wireless options configuration

36 / 81

DLT-V4108 Manual, V01 Prelim

Advantech-DLoG

12.

Wireless options configuration

12.1.

General

DLT-V4108 is a highly integrated industrial PC, all wireless options are able to installed at once

and works by independent connection. In the standard OS companioned with DLT-V4108, all the

wireless connections have been setup in advance and users will not have to setup again. These

information provided for those who needs to build new wireless connections if necessary.

DLT-V4108 RF options:

−

Bluetooth

−

Wireless LAN (WLAN)

−

WWAN (LTE)

−

GPS

Safety information about radio wave emissions

WARNING

Safety information about radio wave emissions. Only authorized skilled personnel are

permitted to configure the wireless settings on DLT-V4108.

Make sure that the transmission power and the radio frequency of the DLT-V4108 comply with

the regulations for the respective country where the device is deployed.

Depending on the country-specific regulations, the operating company/importing company may

be required to ensure the settings for wireless operation are compliant. The regulatory

authorities in the relevant country can provide information on this.

Any changes or modifications which are not expressly approved by the party responsible for

the compliance can lead to the withdrawal of the operating license and guarantee for this

device.

To comply with the SAR limit values for exposure to radio waves while the device is in

operation, the antenna must have a distance of

≥ 20 cm to the body

Examples of country-specific regulations:

Region:

Wireless approval:

EU Verification Notified Body V1.8.1 ETSI

China

CNCA-07C-031

Japan

Japan SDoC, Certificate

Taiwan

Taiwan certification

Canada

Canada Certification Body

USA

USA Certification

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды