Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 11

Страница: 11 / 81

Unpacking, transporting

Advantech-DLoG

DLT-V4108 Manual, V01 Prelim

11 / 81

Unpacking, transporting

−

Open the packaging carefully.

−

Save the packaging material (for possible forwarding transports or returns of the

DLT-V4108).

−

Check the shipment for completeness and any possible damage.

−

Always keep the supplied manuals and documents.

WARNING

Personal injury from integrated UPS battery pack: Short-circuit, fire, chemical burns,

toxic substances.

DLT-V4108 devices contain an integrated UPS with a lithium-ion battery pack (hereinafter

referred to as: battery pack). These can ignite (risk of fire), cause chemical burns or release

toxic substances.

−

Handle and store the DLT-V4108 with integrated UPS battery pack carefully.

Risk of injury due to the weight of the device.

The DLT-V4108 can fall down and cause injuries due to its weight.

−

Always hold the DLT-V4108 by the housing with both hands.

−

Never use the antenna cap as a handle. It can break due to the weight involved.

−

Use the assistance of a second person for installation work.

Risk of injury due to sharp-edged parts on the device.

The strain relief rail of the DLT-V4108 can have sharp edges and cause cutting injuries.

−

Do not hold the DLT-V4108 by the strain relief rail.

If a return/repacking is necessary

If the DLT-V4108 is being returned to the manufacturer, a completely filled-out return shipment

form must be enclosed with every DLT-V4108.

You can find the return shipment form at the end of this manual and on our website

www.advantech-dlog.com (Service&Support)

−

Repackage the device using suitable packaging material to ensure that the device is not

damaged during transport.

−

Comply with the transport conditions for battery packs.

−

Use the required package labels and accompanying documents.

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды