Advantech AWMT, Инструкция по установке и эксплуатации

Страница: 45 / 65

AWMT
44
10.3 RESPONSE TO COMMANDS FROM SLAVE TO MASTER
For command 1 (request condition status) the response is given in the following table.
TABLE 12 : CONDITION STATUS RESPONSE
Bit
No
2
nd
byte 3
rd
byte 4
th
byte 5
th
byte 6
th
byte
0 Tx status 1-on, 0-off Rx status 1-on, 0-off
1 1- Tx PLL Alarm 1-Rx PLL Alarm
2
1- Check sum error
in command
1- Unknown
command
3 1-Alarm
4 N/A
5 N/A
6 N/A
7
Output
level
MS byte
Output
level
LS byte
Internal
Communication
Status
Power Class for
P1dB
(power in dBW)
5 bits
From 30dBm – step
1dB
0 dBW = 30 dBm
1 dBW = 31 dBm
…
20 dBW = 50 dBm
N/A
4-th byte – Internal Communication Status is:
1 – for no communication, 0 – for communication O/K.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
N/A N/A
L-IF
Module
RF-L
Module
PA
Module
IF-L
Module
L-RF
Module
PM
Module