Advantech AMAX 1240 Series, Руководство пользователя

Страница: 8 / 40

AMAX-1220/1240 Series User Manual 2
Products in the AMAX-1220/1240 Series are used to increase the number of axes for
an AMONet RS-485 distributed motion control network. These extension slave mod-
ules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring
between driver and controller. This is very suitable for highly integrated machine
automation applications.
AMAX-1220 and AMAX-1240 support a range of common motor vendors by transfer
cable, such as Mitsubishi J3-Super series, Panasonic Minas A4 or A5 type, and Yas-
kawa Sigma-V.
1.1 Features
 End limit logic is switchable (high or low active)
 Board ID is switchable
 Easily visible LED indicators on board to do diagnosis
 Direct wire to servo drive to save terminal board space while installation
 Max. 6.5 MHz, 4-axis pulse output
 28 bits counter for incremental encoder
 Horizontal installation for for servo or stepping motor driver
 Suitable for DIN-rail mounting
 Linear & Circular interpolation support for AMAX-1220/1240
 Simultaneously start / stop between modules are supported for AMAX-1220 and
AMAX-1240
 Position compare and triggering function is supported for AMAX-1240 by linear
interval & table list method
1.2 AMAX-1220 Specification
1.2.1 Axes
Number of Axes 2 Axes
Driver Output
Pulse
Position control Range -134,217,728 ~ +134,217,728
Acceleration/
Deceleration
1 to 65,536(16-bits)
Driver Speed
Max: 5 Mpps
Min: 0.1 pps
Pulse Output Type
Pulse/Direction(1-pulse, 1-direction type) or Up/
Down(2-pulse type) or A/B phase
Counter
Counter1: Command position counter
Counter2: Mechanical position counter
Counter3: General-purpose deviation counter
Precision 0.5LSB
Output Signal Modes Differential line driving output
Speed Curve T/S-curve Acceleration/Deceleration
2~32-Axes Linear
Interpolation
Range -134,217,728 ~ +134,217,728
Speed 0.1~5Mpps
Precision 0.5LSB
2-Axes Circular
Interpolation
Range -134,217,728~+134,217,728
Speed 0.1~5Mpps
Precision 0.5LSB