manualshive.com logo in svg

Advantech AIMB-760, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-760 Скачать руководство пользователя страница 19

5

•  

Enhanced parallel port:

 Configured to LPT1, LPT2, LPT3, or dis-

abled. Standard DB-25 female connector provided. Supports EPP/SPP/
ECP

•  

Serial ports:

 Two RS-232 ports with one DB-9 connector and one on-

board pin header for extension. Supporting speeds up to 115.2 Kbps. 
Ports can be individually configured to COM1, COM2, or disabled

•  

Keyboard and PS/2 mouse connector:

 Two 6-pin mini-DIN connec-

tors are located on the mounting bracket for easy connection to a PS/2 
keyboard and mouse. 

•   

USB port:

 Supports up to eight USB 2.0 ports with transmission rate 

up to 480Mbps.

1.3.4 Ethernet LAN 

•  Supporting single/dual 10/100/1000Base-T Ethernet port(s) via PCI 

Express x1 bus which provides 500 MB/s data transmission rate.

•  

Controller:

 

LAN 1: Broadcom BCM5721 (G2 version or VG version)
LAN 2: Broadcom BCM5721 (G2 Version)

1.3.5 Industrial features

•  

Watchdog timer: 

Can generate a system reset or IRQ11. The watch-

dog timer is programmable, with each unit equal to one second or one 
minute (255 levels)

1.3.6 Mechanical and environmental specifications

•  

Operating temperature:

 0 ~ 60° C (32 ~ 140° F, Depending on CPU)

•  

Storage temperature:

 -20 ~ 70° C (-4 ~ 158° F)

•  

Humidity: 

20 ~ 95% non-condensing

•  

Power supply voltage:

 +3.3V, ±5 V, ±12 V

•  

Power consumption:

 Maximum: +5 V at 6.64 A, +12 V at 12.59 A 

(Intel Pentium 4 3.4 GHz with 800 MHz FSB, 2 X 256 MB, 2 X 512 
MB DDRII 533 SDRAM)

•  

Board size:

 304.8 x 228.6 mm (12" x 9.6")

•  

Board weight:

 0.7 kg (1.68 lb)

Note:

The Speed & Duplex mode default setting is full 
duplex mode and can NOT be changed.

Содержание AIMB-760





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды