Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 52

Страница: 52 / 157

Open/close antenna (or protective cap)

52 / 157

DLT-V83 Operating Instructions V2.00

8.3.4.

WLAN, WWAN antenna (multi-band) LTE 4G

Open antenna:



Unfasten both screws on the

antenna cap.

Tool: Torx screwdriver, Tx20



Remove the antenna from the

device.

Fig. 8.6: Open WLAN, WWAN antenna

The antenna module is located underneath the antenna cap:

NOTICE: Property damage

Remove the antenna module extremely carefully from the device, as it is secured using thin

connection cables onto the Radio card(s) in the interior of the device.

The connection cables can be detached from the antenna module and the radio card, meaning

WLAN operation is no longer guaranteed.

Fig. 8.7: Open WLAN / WWAN antenna



Unfasten both bolts on the antenna

module.

Tool: Nut driver.



Notice: Property damage

Raise the antenna module

exceptionally carefully (connection

cables!)

Fig. 8.8: WLAN, WWAN antenna opened

Service USB, CFast and mini SIM card

slot are now accessible.

For details, see section

7.5.1 Information

on service USB, CFast and

Mini SIM

card slot

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды