9
2. Mount the Mag. Mount antenna or other external vehicular antenna (to be
purchased separately if the supplied Mag. Mount Antenna does not fit your
purposes).
NOTE!
For best performance use a low-‐loss coaxial cable with the highest gain
antenna.
3. Position the antenna, maintaining a separation distance of at least 8 inches
(20 cms) between the antenna and the body of any user and nearby person, to
assure compliance with the U. S. FCC regulations on RF exposure.
External Antenna
Diagram 5
4. Connect the antenna cable to the external antenna connector on the junction
box. See Diagram below.
5. Feed the antenna cables out of sight to the location where you intend to
mount the junction box.
Connecting cables to Junction Box.
1. Locate a position for the junction box beneath the dashboard on the pas-‐
senger's side of the vehicle or on the center side post between the front seats.
It must be protected from dirt and moisture and must be afforded adequate
space for cooling. There must be sufficient space to allow for connection of all
cabling.
2. DO NOT mount the junction box at this stage. Connect the Microphone,
Speaker, Power cable and Control Module to their corresponding connections
on the Junction Box as indicated in Diagram below.
