6
Diagram 2
3. The visor microphone has a noise canceling feature and must be mounted
facing the driver as shown in the picture above.
4. To avoid visual or physical obstruction, route the microphone cable down
inside the door molding. Allow sufficient slack on the connector end of the
cable to reach the Junction Box.
5. Feed the cable to the location where you intend to mount the junction box.
Note!
The microphone should not be mounted near a window or in a spot
where road and ambient background noise would be substantially high (above
85dB SPL).
C. Mounting of the PTT
1. To attach the PTT to the gear lever, strap the PTT around the gear lever
using the Velcro strip attached, with the cord facing down.
Diagram 2
Facing the driver
Velcro Strip
Flat Plastic
