Advanced HBC-3130, Руководство пользователя, Страница: 20 / 22

3.8 Get Data
This “ Get Data” program is a separate program that retrieves data stored in the IC of
charger .
Once the charger is switched on , data of charging voltage , charging current , voltage at each
of the battery terminals are recorded down at 10 minute interval . When the data bank is full
new data will push the oldest out .Each set of data is marked with a number , new set of data
has the highest number..
3.8.1 Get Data- Total Run Time
This drop window gives the accumulative run time of charger , as soon as the charger is switched on, the
clock starts counting and even no battery is connected .
The total Run Time here is 77hours and 40 minutes from the first time charger has been switched
on.