Advanced Bilirubin Stat-Analyzer BR2, Руководство по обслуживанию, Страница: 7 / 69

7
The Advanced® Model BR2 Service Manual
Model BR2 Specifications
Electrical:
Voltage: 100 to 120 VAC (1/4 A) or 200 to 240
VAC 1/8 A)
Frequency: 50 or 60 Hz
Fuses: 1/4-Amp time delay for 100-120 VAC;
1/8-Amp time delay for 200-240 VAC
Power: 15 Watts
STAT Mode: Power left on continuously
Test Capability: Total and Direct Bilirubin, both on
the same serum orplasma sample
Sample Volume:
30 µ L
Sample Capacity:
Single sample, disposable cuvettes
Readout:
Three-digit, seven-segment LED display
Units:
mg/dL or µ mol/L (S.I. units for export
only; 1 mg/dL bilirubin = 17.1 µ mol/L)
Range:
0 to 30 mg/dL
Resolution:
±0.1 mg/dL
Performance at Reference Conditions1
Linearity:
Within ±0.2 mg/dL from zero to 30 mg/dL
(straight-line method)
Repeatability:
Within ± 0.2 mg/dL over entire range
Drift:
Zero: Less than 0.2 mg/dL/hr after 30-minute
warm-up
Calibration: Less than 0.2 mg/dL/24 hr after 30-minute
warm-up
Performance Over Operating Conditions
Hemolysis: No interference from HbO
2
levels up to
600 mg/dL
Turbidity: Negligible interference from turbidity
associated with triglyceride (TGL) levels
up to 500 mg/dL
Operating Conditions
Temperature: 15°C to 32°C (59°F to 90°F)
Room Humidity: 5 to 80% relative humidity;
(non-condensing)
Storage Temperature: -40°C to +70°C
(-40°F to +160°F)
Test Time:
Instantaneous for TOTAL Bilirubin, 2
minutes for DIRECT Bilirubin
Dimensions inches centimeters
Width: 11 28
Depth: 13 33
Height: 7 18
Weight pounds kilograms
Net: 9 4
Shipping: 12 5.5
Warranty: One-year limited warranty on work-
manship and all parts except glass,
plastic and parts warranted by their
makers.
Certification:
Refer to Regulatory Notices (see page 11) for appli-
cable standards.
*CE marking only available on units delivered prior
to July 22, 2016.
1Reference Conditions: 20 to 25°C (68 to 77°F); 40 to 60% Relative Humidity; tolerances of reference or calibration
solutions excluded.
*