Advanced Bilirubin Stat-Analyzer BR2, Руководство по обслуживанию, Страница: 47 / 69

Voltage Selection & Fuse Replacement
70027
70028
Reference: Use this instruction with replace-
ment part 70027 (.250-Amp) or
70028 (.125-Amp).
Voltage/Position/Fuse:
100-120 250V 1/4-Amp time delay
200-240 250V 1/8-Amp time delay
Tools Needed: Flat-bladed screwdriver.
Warning-Hazardous Voltage
CAUTION: Improper connections
may cause damage to the instrument.
Instruction:
1. Turn off the power and unplug the instru-
ment.
2. Insert a flat-bladed screwdriver between
the fuse holder and the power entry mod-
ule. Carefully pry the fuse holder from
the power entry module.
3. Dislodge the old fuses and reinstall the
new fuses by placing them in the fuse
holder brackets.
4. Slide the indicator pin into the correct slot
on the voltage board.
5. Place the fuse holder back into the power
entry module, making sure the indicator
pin extends through the correct pin hole
on the fuse holder.
For additional information or technical assistance,
please contact Advanced Instruments Hot-Line
®
Service Center (U.S. 1-800-225-4034, outside
North AUS 1-781-320-9000).
B2P70011 Rev2
(BR25 Service Manual)
Page 1 of 1
Indicator Pin
Voltage Selector Card
Fuse Block
Voltage Selector Card Orientation