www.advancedco.com
38
3. Press the number key that corresponds to your
selection. The current setting appears in
parentheses on the first line. Press [#
Command] to verify your selection. Then press
[* Clear] to return to the Phone Control
Submenu.
4. Use the Phone 1 Format instructions when
setting the Phone 2 Format.
4: RPT STEERING
To access
RPT STEERING
, select
[0]: PROGRAM
--->
[5]: PROG ACC’NTS
--->
[4]: RPT STEERING
.
You can direct the various classes of reports to
specific phone numbers. The report classes are:
•
Non-supervisory Alarms:
Include fire alarms,
waterflow alarms, and monitor alarms.
•
Supervisory Alarms:
Come from points that
are configured as a supervisory type.
•
Non-supervisory Restoral’s:
Include fire,
waterflow, and monitor restoral’s.
•
Supervisory Restoral’s:
Come only from points
that are configured as a supervisory type.
•
Trouble Reports:
Include all point and system
troubles and restoral’s. The tests include Auto
Tests, Manual Tests, and Off-normal at Test
Reports.
To direct reports to particular telephone numbers:
1. From the
PROG ACC’NTS
Submenu, press [4]
to select
4: RPT STEERING
. The window
shows:
2. Press the number key that corresponds to your
selection. The window that appears depends on
your choice. In this example, the non-
supervisory alarm is selected. The window
shows:
The options on this window are:
• PHONE 1 ONLY: Sends the report only to
Phone #1.
• PHONE 2 ONLY: Send the report only to Phone
#2.
• PHONE 1 AND 2: Send the report to both Phone
#1 and Phone #2.
• PHONE 2 BACKUP: Sends the report to Phone
#1 and then to Phone #2 if Phone #1 fails. The
D9068P attempts to send the report to Phone
Number 1 first, and if that attempt fails, the
D9068P sends the report to Phone Number 2.
3. Press the number key that corresponds with
your selection followed by [# Command]. Then
press [* Clear] to return to the Report Steering
Submenu.
5: LINE CONTROL
To access
LINE CONTROL
, select
[0]: PROGRAM
--->
[5]: PROG ACC’NTS
--->
[5]: LINE CONTROL
.
This option allows you to set the dialing type and
line supervision for each telephone line. To set the
dialing type and line supervision for phone lines:
1. From the Prog Acc’nts Submenu, press [5] to
select
5: LINE CONTROL
. The window shows:
Refer to
Appendix D
on page 50 for the
appropriate routing of each report.
Report Steering Menu choices 2 to 6 have the
same menu options as Report Steering
1: NONSUP ALRM
. Use the instructions for
NONSUP ALRM to set Report Steering Menu
choices 2 through 6.