Remove all 4 Screws
With a Phillips screwdriver and
remove the top piece.
If Adhered
To a foam piece, use an
object, such as a screwdriver,
to score along each side of the
battery, reducing the amount
of contact to the adhesive
surface. Then try to pull the
battery out again, repeat until
the battery is removed.
Once Removed
Flip the nurse call box top
over to expose the inner
workings. The battery is
located at the top.
To Remove Battery
Hold the nurse call box top still
while pulling on the battery.
If not easily removed the battery
might be adhered to a foam piece.
Recycle
The old battery at your local
recycling center.
Remove the Foam Piece
By carefully peeling it off.
If there is no piece of foam you may
skip this step.
500640
©2018 Advanced Wireless Communications. All rights reserved. *All other trademarks are the property of their respective owners.
(800) 475-5852
20809 Kensington Blvd, Lakeville, MN 55044
www.advancedwireless.com
Quick Start Guide
Nurse Call Box Battery Replacement
