Advanced Kiosks Aegis Booth Kiosk, Руководство пользователя

Страница: 24 / 27

Monitors
The monitors are NOT touch capable, and as such, are not glass coated for protection. The
monitors should be cleaned very carefully. Never spray directly onto the monitor, but onto the
cleaning cloth first. Below are some recommendations for cleaning,
● Specially designed LCD cleaning solution
● 50%-50% v warm tap water
● Use a micro-fiber cloth and avoid buffing or circular cleaning
● Wipe from side to side with gentle pressure
Troubleshooting
In the event that the Aegis Booth kiosk exhibits any abnormal behavior, please refer to the
following troubleshooting steps to help resolve the issue.
Smart Glass does not go opaque when the user is in the booth?
● Make sure that the door is closed firmly
●
Confirm that the magnetic door sensor is properly mounted to the booth
● Check that the secondary motion sensor LED is lighting up red. This means that motion
is detected. If the light is not red and the user is in the booth, contact technical support
Sanitation light does not turn on after the booth is unoccupied?
● Make sure that the door is closed firmly
●
Confirm that the magnetic door sensor is properly mounted to the booth
● Check that the secondary motion sensor LED is NOT lighting up red. This means that
motion is detected. If the light is red and no user is in the booth, contact technical
support
● Confirm that the power cable connecting to the sanitation light is not disconnected
www.advancedkiosks.com | 23