Using the Aegis Desk
You now have an installed and configured Aegis Desk. Congratulations! Now how do you use it?
The following section describes how to use the Aegis Desk hardware.
Using the hardware
The Aegis comes equipped with many standard hardware features that enhance the user
experience. Below is a list of some of the hardware, what it does and how to use it.
Cabinet Access
There are 4 entry points into the
desk. For security reasons
these are kept under lock and
key. A common scenario is
needing to replace the paper in
the printer.
The printer door opens allowing
easy access to the printer. The
other three entry points should
not need to be opened under
normal circumstances but they
are located,
1. Above the printer (power
and USB drawer)
2. Back door of the desk.
This door opens to
reveal the entire
contents of the desk
from the rear.
3. Under the table attached to the wall spine. This is where the cables travel though.
The images show the printer mentioned above. Please note the printer in your desk may be
different than the unit pictured.
Aegis Desk Owners Manual v1a
www.advancedkiosks.com
| 9
