manualshive.com logo in svg

Advanced Instruments OsmoPRO Multi-Sample, Руководство пользователя

Поделиться
Скачать
Advanced Instruments OsmoPRO Multi-Sample Скачать руководство пользователя страница 85

OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide 

85 

F - Supplemental laboratory information system (LIS) 

The OsmoPRO can be connected to a Laboratory Information System (LIS) to exchange 

information. The OsmoPRO supports bidirectional and unidirectional communication protocols 

from CLSI 

1, 2

 

The LIS host computer must be running software configured to communicate with the 

OsmoPRO per the separate description in the OsmoPRO Laboratory Information System (LIS) 

Interface Specification (available from Advanced Instruments, as part number 112197PM). 
The communication link allows the host computer to transmit patient work orders to the 

OsmoPRO and accept test results transmitted from the OsmoPRO. The host work orders 

provide sample information to the OsmoPRO, including which test to perform. 
The OsmoPRO can be configured to automatically transfer available results to the host, or 

manually transfer results to permit the operator time to review the data. In bidirectional mode, 

the OsmoPRO can receive patient work order information from the LIS as needed. The LIS may 

initiate sending patient work order information to the OsmoPRO in advance of sample runs. The 

information is parsed and stored in the system for later use. 

Setting up OsmoPRO LIS communications 

To configure the OsmoPRO for LIS communications, the OsmoPRO computer’s LAN 

connection must be configured and its LIS connection set up. 

Configuring the LAN connection 

The LAN connection on the OsmoPRO must be enabled and the physical network connection 

must ensure the host computer can communicate with the OsmoPRO computer. This is best 

achieved via a dedicated, direct Ethernet connection, and assignment of a static IP address on 

the OsmoPRO. 

Setting up the OsmoPRO LIS connection 

Use the 

Setup LIS Connection

 screen to configure the OsmoPRO to communicate with your 

LIS. This screen is available from the 

Settings

 screen and pressing 

LIS/LAN

. 

1 

CLSI LIS01-A2 Specification for Low-Level Protocol to Transfer Messages between Clinical 

Laboratory Instruments and Computer Systems; Approved Guideline-Second Edition (2008). 

2 

CLSI LIS2-A2 Specification for Transferring Information between Clinical Laboratory 

Instruments and Information Systems; Approved Guideline-Second Edition (2004).

 

 

 

Содержание OsmoPRO Multi-Sample

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды