OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
79
D - Regulatory notices
This product is designed and manufactured in accordance with U.S., Canadian, and European
regulatory requirements as outlined below. Modifications made to this product not expressly
approved in writing by the manufacturer void the user’s authority to operate this product,
previously issued factory approvals, and the user’s rights under the warranty.
The distributor or dealer may have applied additional local, national, or international approvals
to this product. Consult the distributor or dealer for more information and documentation.
Connections should be made with industry standard cables.
Regulatory Approval
Description
U.S. Safety
This product was listed by ETL testing laboratories as being in
compliance with the requirements of UL 61010-1, "Electrical
Equipment for Laboratory Use; Part 1: General Requirements".
The "US" in the lower right of the ETL mark demonstrates this
listing.
Canadian Safety
This product was listed by ETL testing laboratories as being in
compliance with the requirements of CAN/CSA C22.2 No.61010-
1, "Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use; General
Requirements". The "C" in the lower left of the ETL mark
demonstrates this listing.
EC Declaration of Conformity
- EMC
This product meets the intent of Directive 2014/30/EU for
Electromagnetic Compatibility, Class B. Compliance was
demonstrated using the following standards, as listed in the
Official Journal of the European Communities: Consult the
Declaration of Conformance certificate shipped with the product
for the latest update
EN 61326-1, "Electrical Equipment for Measurement, Control,
and Laboratory Use, Part 1 General Requirements".
EN 61326-2-6, “Electrical Equipment for Measurement, Control,
and Laboratory Use, Part 2-6 Particular Requirements IVD”.
