Advanced Instruments Anoxomat III Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 41

Advanced Instruments Anoxomat III Скачать руководство пользователя страница 3

3

Anoxomat® III User’s Guide

Safe use

WARNING: To reduce the risk of bodily injury, electric shock, fire, and damage to your instrument, please read and observe
the precautions in this User’s Guide.

If the product is used in a manner not in accordance with the equipment design, operating instructions or manufacturer’s
recommendations, the operation of the product may be impaired to the extent that a safety hazard is created.

Do not attempt to perform electrical work if you are not fully qualified. This manual is not a substitute for electrical
training.

Symbol conventions

The list of symbols below is for reference only. Not all symbols shown may be used on this instrument or in the
accompanying documentation.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature accompanying this product.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of

uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute risk of

electric shock to persons.

The static symbol within an equilateral triangle is intended to alert the user to the presence of internal components that

could be damaged by static electricity.

This static symbol is intended to alert the user to the presence of a specific component that could be damaged by static

electricity.

This symbol indicates the presence of alternating current (AC).

This symbol indicates the presence of a fuse.

This symbol indicates the presence of protective earth ground.

This symbol indicates the power is ON.

This symbol indicates the power is OFF.

Additional symbol definitions are available in Appendix G.

«
1
2
3
4
5
...
»

Содержание Anoxomat III










































Отзывы:

Нет отзывов