ZTH200 Operating Instructions
051903
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC
.
0630-03
18
4.6.5 RESETTING MODULES (PLUG IN LAMP AND APPLIANCE )
If a module is to be moved to a new position or added to a new network, it has to be reset before doing so. This is
done using this menu.
4.6.6 RESET WIRELESS CONTROLLER
The Wireless Controller can be reset in two different ways, by “user data only” selection or “factory default”. User data
only will only reset groups, scenes and names. The Wireless Controller will still retain information about the modules
that have been added to the network. A factory default reset should be used with extreme care. Factory default will
clear the controller of all information, and it will clear groups, scenes, names and will delete all modules from the
network.
