0743-01
1
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
ZCU201 Specifications
P/D 111208
FEATURES
• Provides a USB interface to Z-Wave enabled devices.
• Connects to any USB port or powered USB hub.
• Complete with USB connector cable and 230V
power adaptor
PRODUCT DESCRIPTION
The
ZCU201 USB Interface
allows you to
communicate from any USB port to control Z-Wave
enabled products, freeing serial ports for other use.
ACT does not provide any computer software for this product. This
product is intended to be used with third party software developed using
the Z-Wave dll, which is available in the Z-Wave™ Developers Kit.
A third party software provider may elect to update the firmware
with future versions of the Z-Wave library, or request that ACT
update the firmware (at an added charge). Contact your sales
representative for more details.
HomePro wireless radio frequency products utilize Z-Wave™ technology to
communicate and inter-operate, and are compatible with other Z-Wave™
enabled products.
ZCU201 has non-skid feet for placement on horizontal surfaces.
ORDERING INFORMATION
Specify:
ZCU201 -
USB to Z-Wave Interface, with 230V Power Supply
SPECIFICATIONS
Electrical
Power
External Power Supply included
- 230 VAC to 9 VDC Power Supply
(200mA) with 2.1mm power plug, center (+) positive.
Signal (Frequency)
868.42 MHz
Range
Up to 30 meters (line of sight) between the USB Interface and the
closest Z-Wave enabled product.
Mechanical
Dimensions
13.98cm W x 10.17cm D x 3.49cm H (5.505" W x 4.005" D x 1.375" H)
Weight
Approx. 227 grams (8 oz.)
User Interface
Computer and appropriate software
Environmental
Operating Temperature Range
0-40
O
C (32-105
O
F) For Indoor Use Only
ZCU201
HomePro
RF Home Automation
USB to Z-Wave Interface
Power
Supply
Included
